2-Phase Hybrid Stepping Motor

Your location:Home  Products  Stepper Motor   2-Phase Hybrid Stepping Motor

2-Phase Hybrid Stepping Motor

Hybrid Stepper Motors are a high precision positioning motion system. Their high power at relatively low speeds, and their ability work in full, half or micro step mean that a large majority of application problems can be solved by utilizing this technology.
img of Stepper Motor 28HS series NEMA11

Stepper Motor 28HS series NEMA11

Holding Torque
4.5-10(N.cm±10%)
Current/Phase
0.35-0.6(A)
Resistance/Phase
4.2-24 (ohms±10%)

img of 2-Phase Hybrid Stepping Motor Series 35HM NEMA14 0.9°

2-Phase Hybrid Stepping Motor Series 35HM NEMA14 0.9°

Holding Torque
8-14(N.cm±10%)
Current/Phase
0.36-0.8(A)
Resistance/Phase
4.5-30 (ohms±10%)
img of 2-Phase Hybrid Stepping Motor Series 35HS NEMA14  1.8°

2-Phase Hybrid Stepping Motor Series 35HS NEMA14 1.8°

Holding Torque
8-14(N.cm±10%)
Current/Phase
0.36-0.8(A)
Resistance/Phase
4.5-30 (ohms±10%)
img of 2-Phase Stepping Motor Series 39HM NEMA16  0.9°

2-Phase Stepping Motor Series 39HM NEMA16 0.9°

Holding Torque
8-22(N.cm±10%)
Current/Phase
0.4-1.2(A)
Resistance/Phase
2.5-30 (ohms±10%)
img of 2-Phase Hybrid Stepping Motor Series 39HS series  NEMA16 1.8°

2-Phase Hybrid Stepping Motor Series 39HS series NEMA16 1.8°

Holding Torque
8-22(N.cm±10%)
Current/Phase
0.4-1.2(A)
Resistance/Phase
2.5-30 (ohms±10%)
img of 2 Phase Stepping Motor Series 42HM NEMA17 0.9°

2 Phase Stepping Motor Series 42HM NEMA17 0.9°

Holding Torque
10-42(N.cm±10%)
Current/Phase
0.4-1.7(A)
Resistance/Phase
1.2-30 (ohms±10%)
img of 2 Phase Hybrid Stepping Motor Series 42HS NEMA17 1.8°

2 Phase Hybrid Stepping Motor Series 42HS NEMA17 1.8°

Holding Torque
10-42(N.cm±10%)
Current/Phase
0.4-1.7(A)
Resistance/Phase
1.2-30 (ohms±10%)
img of 2 Phase Hybrid Stepping Motor Series 57HM NEMA23   0.9°

2 Phase Hybrid Stepping Motor Series 57HM NEMA23 0.9°

Holding Torque
24-150(N.cm±10%)
Current/Phase
0.62-4.2(A)
Resistance/Phase
0.4-13(ohms±10%)
img of 2 Phase Hybrid Stepping Motor Series 57HS NEMA23 1.8°

2 Phase Hybrid Stepping Motor Series 57HS NEMA23 1.8°

Holding Torque
24-150(N.cm±10%)
Current/Phase
0.62-4.2(A)
Resistance/Phase
0.4-13(ohms±10%)
img of 2 Phase Hybrid Stepping Motor Series 57HY NEMA23  1.8°

2 Phase Hybrid Stepping Motor Series 57HY NEMA23 1.8°

Holding Torque
24-150(N.cm±10%)
Current/Phase
0.62-4.2(A)
Resistance/Phase
0.4-13(ohms±10%)
img of 2 Phase Hybrid Stepping Motor Series 60HS NEMA24 1.8°

2 Phase Hybrid Stepping Motor Series 60HS NEMA24 1.8°

Holding Torque
75-260(N.cm±10%)
Current/Phase
2-4.2(A)
Resistance/Phase
0.4-1.8(ohms±10%)
img of 2 Phase Hybrid Stepping Motor Series 86HS NEMA42 1.8°

2 Phase Hybrid Stepping Motor Series 86HS NEMA42 1.8°

Holding Torque
220-850(N.cm±10%)
Current/Phase
2.7-5(A)
Resistance/Phase
0.4-2.9(ohms±10%)
img of 2-Phase Hybrid Stepping Motor Series 110HS NEMA42 1.8°

2-Phase Hybrid Stepping Motor Series 110HS NEMA42 1.8°

Holding Torque
12.7-26(N.cm±10%)
Current/Phase
5-6.5(A)
Resistance/Phase
0.65-1.15(ohms±10%)
The name can not be empty!
The email can not be empty!Email format error!
The phone can not be empty!
The message can not be empty!

Hybrid Stepper Motors are a high precision positioning motion system. Their high power at relatively low speeds, and their ability work in full, half or micro step mean that a large majority of application problems can be solved by utilizing this technology. The hybrid motor technology can be considered as an optimal solution for a wide variety of applications today, with the absence of mechanical commutation and the use of high quality bearings enables these products to be considered where extended lifetime and or high loads (axial / radial) are needed or exist. Available in 2 or 3 phases with sizes from NEMA 11 to NEMA 42 (20mm to 110 mm square) and step angles of 1.8°and 1.2°. These hybrid products can achieve holding torques of between 4.5N.cm to 17 Nm as well as providing a high level of flexibility in terms of;

– Output shaft modifications, Hollow etc…

– Wiring looms, cabling and connectors

– Addition of pulleys, feedback devices etc…

– Customized windings

– High axial / radial load capability.

– IP 65 rating (available upon request).

Certain versions are of a unique flat design that allows their use in space confined applications.


Send A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

name*
email*
tel
mess*

Contact Us

About Us

Changzhou Sunrise Electric Motor Company was founded in 2004 and is located about 200 km west of Shanghai.

We are experts within Brushed and Brushless DC motors, AC servo motors, Hybrid stepper motors and customized motor solutions. In addition, our logistical services are of the highest quality.
At Sunrise Motor, we value open communication between all parties to ensure the right solution for you.
Let our companies go hand in hand towards a profitable future. You benefit from more than 15 years of experience within electro-mechanical motor solutions when doing business with us.

The motors listed have been exported overseas through our sales representatives in North America and Europe. They apply to: application of printer, carve machine, medical instruments, entertainment lighting, textile machines, etc.

CopyRight © 2023-2024   Changzhou Sunrise Electric Motor Co.,Ltd  All rights reserved   Sitemap   All tags   Designed by Zhonghuan Internet